Product Information
Excellent products and considerate service
Basic -Manual Series Coordinate Measuring Machine(CMM) OEM
The biggest highlight of Basic -Manual series manually upgraded CMM is economy and practicality. It can be used as a pure hand and can be upgraded to automatic / full-automatic CMM as needed! It can not only reduce the initial capital investment for enterprises, but also effectively avoid secondary procurement through rapid upgrading, especially for enterprises that are just starting or have relatively few testing frequency.
The reason why this series of CMM is called upgradable CMM is that it has reserved each mounting hole position of transmission part required by automatic CMM. You only need to add servo motor,synchronous belt and corresponding control system of transmission part to upgrade to automatic CMM quickly!
At the same time, you can upgrade it to a higher automatic probe system / five axis system / contact scanning system.
Operation mode: Manual / automatic
Standard configuration: rgs20-s grating ruler, rgh22reading head
7480 control card and Renishaw MCP / mh20i probe system
Recommended measurement range of the series: 05.07.05/06.08.06
Parameter | Configuration |
Working area | 500mm*700mm*500mm 600mm*800mm*600m 800mm*1000mm*600mm 800mm*1200mm*600mmm |
Maximum allowable indication error | MPEE(μm):2.0+L/300 |
Maximum allowable detection error | MPEP(μm):2.2 |
Weight | 300Kg – 600kg |
Controller | RENISHAW UCC |
Probes | RENISHAW Mh20i/PH10/PH20… |
Software | Axel CNC (with CAD) |
Frame | High-quality natural granite worktop, equipped with M8 threaded inlays. The three-axis guide rail is made of high-quality natural granite with the same temperature characteristics and resistance to effective deformation. The X-direction triangular beam structure reduces motion loads and improves overall machine performance. It is currently the best structural design to ensure stability and rigidity. The overall lower dovetail guide rail of the Y-axis effectively reduces the movement torsion and ensures the accuracy and repeatability of the measuring machine to the maximum extent. |
Counting system | RENISHAW RGS20 metal tape scale RENISHAW RGH22 Series readhead, resolution 0.5μm |
Transmission System | Three-axis GATES synchronous belt has compact structure, smooth operation, no gap, fast speed, low noise and easy maintenance. Three-axis PITTMAN DC servo motor and new two-stage belt reducer ensure accurate and rapid transmission. The motor is placed remotely to reduce moving mass, increase speed, and avoid the impact of motor heating on the performance of the measuring machine. |
Pneumatic System | Preloaded air bearings surround the distribution of high-precision self-cleaning air bearings, optimizing the air bearing gap and improving stability. The three axes have independent pneumatic systems, which can independently adjust air pressure and flow to achieve the best movement state. The Z-direction adopts German FESTO adjustable pneumatic balance, which makes the movement smooth and can automatically brake in emergency situations to ensure safety. Japanese SMC air filtration system |
This series with British RENISHAW UCC T3-2 controller
Suitable for universal three-axis trigger manual test head solution.
Powerful three-axis coordinate measuring machine controller with built-in standard trigger TP200 signal interface.
●Used in three-axis manual measuring base coordinate measuring machine market
●Suitable for large and small coordinate measuring machines using trigger probes
●Integrated TP200 interface
UCC T3-2 Dimensions
Width: 440 mm (19 in housing)
Height: 44 mm (1U)
Depth: 180mm
Weight: 2.1 kg (4 lb 10 oz)
The following information applies to all UCC controllers:
●Configured for CNC controlled (DCC) coordinate measuring machines
●Processor type: 1.6 GHz Intel Atom
●Suitable hand controls: MCUlite-2*, MCU5, MCU5-2, MCU W, MCU W-2
●Digital SPA control output
●Communication connection with computer: Ethernet
●Computer operating system compatibility: XP pro, Windows 7, Windows 8
●Servo loop time: 0.5 ms
●Trigger probe measurement (TTP) function
●Renishaw UCCserver (I++ DME)
●General UCC software integration
●Digital raster output: RS422 - Renishaw
●Analog grating input: via external interface
●Power supply for I/O: 24 V at 1 A
●I/O specifications:
○User configurable
○Active high level or active low level
○Voltage range 5 V to 24 V
○Complies with external and internal limit switch requirements
○Comply with soft limit requirements
○Coordinate measuring machine spatial error correction function
○Compatible with Renishaw UCCassist
* Not applicable to REVO/REVO-2
Standard software: Axel 7 (ART-DMIS CAD)
Axel 7 custom software is continuously integrating YC-DMIS CAD elements, and the software geometric algorithm has passed the authoritative PTB and NPL certification;
The Windows system graphical operation interface is as easy to use as office, making measurement work faster, easier and less labor-intensive! And different functional modules can be added according to user needs.
The newly designed Ruiban interface also integrates and greatly enhances the popular toolbar in the previous Axel version, greatly improving daily work efficiency and bringing you more production benefits.
Complete geometry, CAD and pipe measurement work within the same user interface! (The pipe fitting module is a separate billing module)
Probe heads
MH20i has a good degree of positioning repeatability, thereby effectively improving the efficiency of multi-direction measurement .The probe can be moved to 168 repeatable positions of the spatial location in 15-degree increments using both the A and B axes, requiring a one-time only qualification for each stylus position; ensuring rapid parts detection capabilities.
II. RENISHAW TP20
The integral TP20 touch-trigger probe gives 5-axis or 6-axis operation.
It can rapid auto Exchange between stylus configuration or by hands without the need to re-calibrate and save much time.